Maestrini Bronze High Flow Water Intake Scoop (Wedge / 2" BSP)

Maestrini Bronze High Flow Water Intake Scoop (Wedge / 2" BSP)Maestrini scoop strainer made from bronze, with a wedge shaped grating. This scoop is designed for raw water intake systems, such as those used for high speed vessels. It fits through the hull with the grating on the outside and the male threaded pipe leading inside, usually to a valve to open and close the intake. The scoop grating can be secured to the hull using a screw although it is recommended to use a marine sealant as well. The scoop is also

- Tempest Commander 2

- Perkins M20 Perama - Tempest Vedette 25 MkII & Vedette 25 MkVI - Volvo Penta AQ2B

can replace conventional blocks where weight saving is critical

With some models of Class A transponders this cable can also be used to configure the Class A with static AIS data and/or the mandatory voyage data that should always be programmed in to a Class A transponder before starting a passage

wash screen

Manual discharge option (requires bi-directional cable) Pressure Gauge

bilge/lockers

Double seal ensures optimum insulation

10-24577-19

25 Lux: 730

50 and 60 hp (1999-and later)

RAYMARINE DRAGONFLY 4