NREL High-Pressure LTE Cell - PEM/AEM with internally pressure-balanced REs

NREL High-Pressure LTE Cell - PEM/AEM with internally pressure-balanced REsThis electrolyzer is a research grade electrochemical setup designed for advanced electrocatalysis studies under controlled pressure, inspired by the NREL High Pressure Liquid Testing (HPLT) electrolyzer concept and extended to enable true three electrode measurements on both the anode and cathode sides. The detailed specification of the electrolyzer developed by National Renewable Energy Laboratory (NREL) can be found on its product page. On the

disk diameter: 2 or 3 mm

This jig features for hand press that prevents the loss of compression force on the coin cell

ceramic or solid-state electrolyte pellets

NET weight: 2 kg

Ion scattering spectroscopy revealed that the TiO2 atomic plane terminated the as-treated clean surface and that the terminating atomic layer could be tuned to the SrO atomic plane by homooepitaxial growth

01Ohms/cm (If you would like to measure the resistivity accurately

weight: 85 g/m2

the pad can be re-used only with the same type (particle size) of alumina suspension

1 x chamber - 0039CPEMASM

alcohols or acetone and rinse it with deionized water at the end

Polish:                                                     One side polished

and 1 x 1 mm dia