Taylor Made Charlevoix Flag Clip For 7/8" - 1" Pole [57928]

Taylor Made Charlevoix Flag Clip For 7/8" - 1" Pole [57928]Charlevoix Flag Clip For 7 8" 1" Pole The original Charlevoix Flag Clip ends the trouble of attaching your flag to a standard flag or stern light pole. This simple onepiece clip attaches semi permanently to your pole and will keep your flag securely in place at speeds up to 50 miles per hour. Flags can be attached or removed in seconds. The clips can also be removed, if desired. Specifications: Type: Flags & Flag Poles Box Dimensions: 2"H x 3"W x 5"L

The rust proof metal u-bolt accommodates rails in diameter from 0

The Y- Valve may also be used in a bilge pumping system to select between two separate bilge pickups in different bilge compartments providing for evacuation of two separate bilge areas with only one bilge pump

(inches): 7/64

Radiation pattern: Omni-directional

shelves and compartments with our high efficiency LED lights from the experts in marine lighting

If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties

The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump

Open Flow (CFM): 250 CFM

Designed for 5/16" chain and 5/8" rope combination

The remote On/Off key switch is used for the remote operation of the 701-MD and 720-MDO battery switches

Piezo electronic ignition system

Red 10 AWG Primary Cable - 100'