Victron Cerbo GX MK2 [BPP900450110]

Victron Cerbo GX MK2 [BPP900450110]Cerbo GX MK2 Victron's Cerbo GX MK2 is the most commonly used GX product. This communications center has hardware revision 2 with two VE. Can ports, 3 USB host ports, and digital input pulse counting. The Cerbo GX MK2 Is Different from the Cerbo Gx since It Has: Two fully functional CAN bus ports VE. Can 1 and VE. Can 2. Instead of one VE. Can and one BMS Can port VE. Can 1 is isolated (on previous models, there was no isolated CAN bus port) RJ 45

Amperage: 100A

4 Ph) with only one opening side and one eye

the i70s is easy-to-customize with digital

Two 5 Volt USB outputs

The Mantus universal bracket allows you to store an anchor of any design on the rail in cockpit or on the bow

3-meter cable

Applications: Sails

but can be controlled with SPST or SPDT switch for applications where a normally open relay is desired

A Y-Piece fitting enables two pumps to discharge through a single line when a diverter valve is not required

Power at 25 degrees C / 40 degrees C: 300 / 260W

• Small diameter clutches optimized for 5/16" and strongly recommended for high strength line

Salt spray resistant