EasySplit 220™ Customize Your Own, 30A 240v Splitter 5ft. cable with kWh Meter

EasySplit 220™ Customize Your Own, 30A 240v Splitter 5ft. cable with kWh MeterNew GEN II EasySplit 220 with a gorgeous new custom graphic and enclosure! Now w side mount outlets for a slimmer wall profile and sleeker look. This is our best EasySplit 220! STILL PROUDLY BUILT HERE IN THE USA!! This is the EasySplit 220 Customize Your Own page, here you pick your own power input cable and two outlets amongst many choices, this is offered as an easier alternative to looking through our catalog for a pre configured EasySplit 220 to

Allows a EVSE or any device equipped with a NEMA L5-30 (Locking

The Electric Range Buddy Plus #2 is a 2-way switcher based on the original Electric Range Buddy #2

If you are using a 4-prong device that operates on only one Phase (120volts) the displayed wattage and kWh's will be doubled as it's calculated at 240volts

For EVSE's rated for Level 1 / Level 2 charging and equipped with a 6-15 or 6-20 plug

This allows you to see only the Energy your Electric vehicle has consumed

a NEMA 6-50 wall outlet only supplies two Hots and one ground

Hardwired power input OR optional power input cables

EasySplit 220™or Dryer Buddy® unit with a L14-30 Generator cord (Locking 4-prong 120/240v 30amp)

(see pic #2)

Designed so other members of the family don’t accidentally start using power in the RV while you’re charging your EV

This prevents the utility grid from experiencing a large surge when power is restored and allows vehicles to begin drawing

This unit is built with the 14-30 outlet on the left of the face and the L6-30 outlet on the right of the face