7" ID to 6" ID .38" wall

7" ID to 6" ID .38" wallThis reducing 90 degree intake elbow has a Wall thickness . 38". It can be used any place where you are connecting a 7" OD tube and a 6" OD tube. Temp rated at 250 275F. Recommended clamps are 94100 0675 on the small end and 94100 0775 on the big end. 90HL70R60 90L70R60

and then the 4-1/2" intake tube fits inside the insert

This 45 degree silicone elbow is 4-1/2" ID

5" OD tubes and you need to make a 90-degree bend

this 130 degree elbow just might do the trick

and screw on the locknut to capture the first few threads

This reducing hump hose connects 4-1/2" OD and 4" OD intake tubes together

94100-0238This 45 degree silicone elbow is 2" ID it handles 350 F continuous and is perfect for intercooler/aftercooler applications

This 54 degree by 6" ID hose is used where a 45 degree elbow is not quite a sharp enough bend

This 8" 90-degree intake hose has a wall thickness

This 45 degree silicone elbow is 3" ID it handles 350 F continuous and is perfect for intercooler/aftercooler applications

handles 350F continuous and is perfect for intercooler/aftercooler applications and coolant systems

This 2-3/4" ID high-temp silicone hump hose is useful in any application that requires a high heat resistance